Clinton Electronics CE-T909 Instruction Manual

IR Turret CameraCE-T909

Connecting the CE-REMOTE to the camera. Unscrew cap and locate port as shown.1. Press the SET button.The Setup menu is displayed on the monitor scre

3. Set up a selected item by using the LEFT and RIGHT buttons.4. To nish and save the settings, select ‘EXIT’ and press the SET button.This funct

l MANUAL : Manual Lens selectionl DC : Auto Iris Lens selection3. Press the SET button if you wish to return to the previous menu.Notes The bri

EXPOSURE1. When the SETUP menu is displayed on the screen, select EXPOSURE using the UP and DOWN buttons.2. Select the desired mode using LEFT an

l AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the higher the noise. - OFF: Deactivates the AGC funct

Use the WHITE BALANCE function to adjust the screen colors.1. Position the cursor to point to ‘WHITE BAL’ on the SETUP menu screen using the UP and

This camera is designed to deliver a clear and distinct image of both subject and background,evenwhenthesubjectisinbacklit,usingaproprietar

l BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly. BLC ON BLC OFF l HLC (Hig

This function reduces the background noise in a low luminance environment.1. When the SETUP menu screen is displayed, select ‘DNR’ using the UP and

3. Set the DNR mode to ‘ON’ and press the SET button. The noise reduction level can now be adjusted.Pictures can be displayed in either color or bl

The lightning ash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous vol

2. Select the desired mode using the LEFT and RIGHT buttons. l COLOR : The picture is displayed in color. l B/W : The picture is always display

1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ using the UP and DOWN buttons.2. Select the desired mode using the LEFT and RIGHT b

l D-ZOOM : Digitally zooms, the range is x1 ~ x10. l SHARPNESS : As this value is increased the picture outline becomes stronger and clear

SPECIAL1. When the SETUP menu screen is displayed, select ‘SPECIAL’ using the UP and DOWN buttons.2. Select the desired mode using the LEFT and R

2. Set to ‘ON’ using the LEFT and RIGHT buttons. 3. Press the SET button. 4. Use the 4 directional buttons to move to a character and sel

5. Enter a title, move the cursor to ‘POS’ and press the SET button. The entered title appears on the screen. Select the position to displ

1. When the SPECIAL menu screen is displayed, press the UP and DOWN buttons so that the cursor points to MOTION DET. 2. Set up the funct

- MASK COLOR: Determine area color. Select grey, green, red, blue, black or white. - TRANSP: Determine the transparency of the selected a

Troubleshooting Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.comIf you have trouble operating your camera, re

Troubleshooting Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.comProblem SolutionThe MOTION DETECTION function

Table of ContentsWarning 1Precautions 2Components 4Installation 5On Screen Display (OSD) Menu 6Accessing the OSD Menu Settings 7 LENS• 8EXPOS

SpecicationsCamera CE-T909Image Sensor 1/3 Inch SONY Super HAD CCDResolution 580TVLinesIR LEDs 42 pcsEective Pixels 768(H)x494(V)Scanning Sy

Dimensions Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com4.37”5.51”FRONT4.37”5.51”WSIDE28

MEMO

MEMO

v.03.23.09

Contact an authorised technician to carry out the inspection. If the camera emits smoke or is unusually hot for a long period, a re may be cause

Only use the camera under conditions Severe lighting change or icker can where temperatures are between cause the camera to work improperly. -20°F

It can cause malfunctions to occur. It can damage the CCD. If exposed to radioactivity the CCD will fail.3 Sales: 1-800-447-3306 Suppor

Components4 Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com

Installation Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com51. Place the mounting plate on a at installa

On Screen Display (OSD) MenuOn Screen Display (OSD) Menu •Camera functions and settings can be adjusted or changed by activating the OSD menu. Wh